885032 SoundtraxxNTSU-KN1 Tsunami 2 DCC Sound Decoder - Kato E/F/PA/F40/P42 Installation Kit Part # 678-885032

The 885032 Soundtraxx TSU-KN1 Tsunami 2 DCC Sound Decoder is a game-changer for N-Scale modelers. It's our first plug-and-play Tsunami2 decoder for N-Scale. Now, you can enjoy all the great Tsunami2 features in your N-Scale locomotives. This decoder is specially designed to fit Kato N-Scale E, F-units, F40PH, PA, and P42 locomotives. It packs prime mover selections for all these models in one small decoder. With this decoder, you get easy installation, super-realistic sounds, and all the features Tsunami2 decoders offer. The TSU-KN1 comes with a complete installation kit for a hassle-free setup. It also has 4 LED-friendly outputs, so you don't need external resistors. The installation kit includes the TSU-KN1 Decoder, Mini Cube 3 Speaker and Baffle, Speaker wire, Kapton Tape, and 2 Sunny White LEDs. Specifications: Dimensions are 55 x 13.8, Max. Motor Stall Current is 500mA, Max. Function Current is 100mA per output, 4 LED-friendly Function Outputs (no resistors needed), 1W Audio Amplifier with 8-Ohm Load, DCC Track Voltage ranges from 7.5V - 22V, and it has 16 Sound Channels.

Using this Soundtraxx Tsunami 2 DCC Sound Decoder is easy. First, take out all the parts from the installation kit. The kit includes the decoder, speaker, wire, tape, and LEDs. Start by installing the decoder into your Kato N-Scale locomotive as per the design. Connect the speaker using the provided wire. The 4 LED-friendly outputs make it simple to attach the LEDs without using external resistors. When it comes to power, make sure the DCC track voltage is between 7.5V - 22V. For maintenance, keep the decoder and speaker clean. Avoid getting them wet. If you're not using the locomotive for a long time, it's a good idea to store it in a dry place. Also, don't exceed the maximum motor stall current of 500mA and function current of 100mA per output to prevent any damage.