1339 TCS Train Control Systems / K0D8-D Kato Decoder (SCALE=N) Part # 745-1339

The 1339 TCS N Scale Train Control System comes with the K0D8 - D Kato Decoder (Part # 745 - 1339). It has a drop - in interface type. Dimensions are 2.139' x 0.538' x 0.068' (54.32mm x 13.67mm x 1.73mm). It operates at a continuous/peak of 1.0/2.0 Amp with 8 total functions and a function rating of 80 mA. There are 6 12V outputs and 8 LED outputs. This N - scale drop - in decoder is for Kato B - unit locomotives like PB - 1, F3B, F7B, and E9B. Check the installation pages for a full list of compatible engines. Note that the K0D8 line has different lighting configurations, and the K0D8 - D has no on - board LEDs. It features back EMF load compensation for great slow - speed control, quiet drive for noise - free motor performance, DC mode for automatic DC power detection, RailCom® for communication with the command station, variable momentum for custom acceleration/deceleration, LED support without external resistors, incandescent bulb support for 12 - Volt bulbs, function remapping for lighting control, 20 programmable lighting effects, dimmable brightness for LEDs or bulbs, decoder lock to prevent unwanted programming, Airwire™ compatibility, and user - loadable speed tables for custom speed curves and limits.

Using your 1339 TCS Train Control System with K0D8 - D Kato Decoder is a breeze. First, make sure your locomotive is compatible with this decoder. You can find the full list of compatible engines in the installation pages. Install the decoder following the provided instructions. When it comes to power, the decoder can automatically detect DC power, and you can also set up how the lighting effects work on DC. You have a lot of customization options. For example, you can create your own acceleration and deceleration curves with the variable momentum feature, and choose from 20 different lighting effects. You can even set custom speed curves and limits using the user - loadable speed tables. Remember, the K0D8 line has different lighting configurations, so pay close attention to compatibility. And since the K0D8 - D doesn't have on - board LEDs, you'll need to connect your own. When connecting LEDs, you don't need external resistors. To keep your decoder in good shape, avoid exposing it to extreme temperatures and moisture. If you're not using it for a long time, store it in a dry and cool place. Also, make sure to activate the decoder lock to prevent any accidental programming changes.