DZ123-10PACK DIGITRAX / 10 - Pack of Digitrax -DZ123-Mobile DCC Decoders -- Wired, 1.0 Amp, (Scales = ALL) YANKEEDABBLER Part # 245-DZ123-10PK

Get this 10-pack of Digitrax DZ123 Mobile DCC Decoders. They are wired, have a 1.0 Amp current rating, and work with all scales. The Digitrax LocoMotion® System makes your locomotives not only look real but also run like the real thing. Features include torque compensation for silent operation, 128-speed step operation, momentum with acceleration and deceleration, and many more. It has realistic lighting effects, function remapping, and a master light switch. It also has decoder lock, transponder, and all-mode programming. Works with most DCC-ready Z, N, and HO scale locomotives up to 18V track voltage. Note: DZ123 does not have Scaleable Speed Stabilization (Back EMF). Specifications: 1.00 Amp motor current rating (2.0 Amps Peak), size 0.36” x 0.55 x 0.13” (9.144mm x 13.97mm x 3.302mm), wired installation, 2-500mA function outputs, FX3 function type, and Economy Series 3 features.

Using these Digitrax DZ123 DCC decoders is easy. First, make sure your locomotive is DCC-ready and the track voltage is within the 18V limit (you can use UP6Z to drop the voltage if needed). Then, wire the decoder according to the instructions. When operating, you can take advantage of features like the 128-speed step operation for smooth control. For lighting effects, use the function outputs. Remember, the DZ123 doesn't have Scaleable Speed Stabilization (Back EMF). When it comes to maintenance, keep the decoder clean and dry. Avoid exposing it to extreme temperatures or moisture. If you need to reset the decoder, you can use the decoder reset CV with or without speed table reset. Also, be careful with the motor isolation protection to prevent damage to the decoder.