1013 TCS Train Control Systems / MC2 Decoder (SCALE=HO) Part # 745-1013

The MC2 decoder is perfect for HO and N scale model trains. It has a 7 - pin JST socket and is designed for locomotives where T1 or M1 decoders are too large. Similar in size to the FL2, it offers excellent motor control. You can either hard - wire it or choose the option with 8 - pin NMRA plugs. Key features include Back EMF Load Compensation for great slow - speed control and high - performance under load, Quiet Drive for a silent motor operation, DC Mode with auto - detection of DC power and configurable lighting effects, Variable Momentum for custom acceleration and deceleration, support for 12 - Volt incandescent bulbs, Function Remapping for easy lighting control, 20 programmable lighting effects, Dimmable Brightness for your bulbs, Decoder Lock to prevent accidental programming, Airwire™ compatibility, and User - Loadable Speed Tables for custom speed curves and limits.

Using this MC2 decoder is easy. First, if you've chosen the hard - wired option, carefully connect the wires according to the provided diagram. If you have the 8 - pin NMRA plugs, just plug it in. When powering on, the decoder will automatically detect DC power. You can use buttons 0 through 12 to control the lighting functions. To set custom acceleration and deceleration, use the Variable Momentum feature. For lighting, you can choose from 20 different programmable effects and adjust the brightness. Remember, when programming the decoder, use the Decoder Lock to avoid any accidental changes. As for maintenance, keep it clean and dry. If you're using it with incandescent bulbs, make sure they are properly installed to prevent overheating. And if you want to change the speed curves or set limits, use the User - Loadable Speed Tables.