Digitrax BP600MH Ni-MH 600mAH 3.6v Battery Pack (Scale = ALL) Part # 245-BP600MH

The Digitrax BP600MH is a high - quality Nickel - Metal Hydride battery pack with a capacity of 600mAH and a voltage of 3.6v, suitable for all scales. If you don't have a PS - 14, you'll need one to charge the battery in the throttle. It's compatible with Digitrax throttles that have a 3 - pin battery plug. You can charge it inside the Digitrax throttle without removing the battery cover. This battery pack has no “memory” effect and works well with the DT602 Family of throttles.

Using this Digitrax battery pack is easy. First, make sure your throttle is compatible, it should have a 3 - pin battery plug. If you don't have a PS - 14 charger, get one as it's needed to charge the battery in the throttle. To charge, just insert the battery into the throttle and connect the charger, no need to take off the battery cover. A key thing to note is that you should use the right charger to avoid damaging the battery. For maintenance, store the battery in a cool and dry place when not in use. Also, try to fully discharge and recharge it every few months to keep it in good condition. And remember, since it has no battery “memory” effect, you don't have to worry about partial charging.